VT 510-V1 Connector - Self-adjusting Center Pin

VT 510-V1 Connector - Self-adjusting Center Pin

Your Price: $4.00
In Stock
Part Number:VT_510-V1

Choose Options

Diameter
10mm
14mm
V1-22mm
28.5mm [+$0.50]
V1-Smooth Top 22mm
V1-BLACK 22mm Air Slots [+$0.50]
V1-BLACK 22mm Smooth Top [+$0.50]
V1-BLACK 28.5 Smooth Top [+$1.00]
Quantity Pricing
Quantity
Price
  • 2 - 5
  • $3.75
  • 6 - 20
  • $3.50
  • 21 - 49
  • $3.25
  • 50 - 99
  • $3.00
  • 100 - 199
  • $2.75
  • 200+
  • $2.50
All sizes in stock!!!  Ring Terminal for Ground connection Included!

We are proud to bring you our very own high end 510 connector.  Ultra low profile shoulder, self-adjusting spring loaded center pin, brass backer nut for solid and secure installation.  New longer center pin insures contact with the shortest and longest attys. Spring has been upgraded for increases stiffness.
Made of Stainless, Brass, & High Temp insulating material this connector is perfect for box mods and the discerning modder!  

  • The spring carries no electrical load!
  • 10mm,14mm, 22mm, or 28.5mm diameter - Note: by definition the 10mm has no landing pad!
  • 22mm Smooth top option for drippers only
  • Only 1mm thick landing pad
  • Made of Stainless with High Temp Insulator, and brass retainer cap and nut - rated for 450F degrees continuous service
  • Assembled connector length - 12mm 
  • Body threading - M10x0.5 - 10mm diameter ... about 3/8"
  • Ring Terminal for ground connection included
MUST be disassembled for soldering!!!  Disassemble connector and remove center pin PRIOR to soldering.  Slide bottom retainer over wire, then slide spring over wire, NEXT solder wire to the center pin using the 1mm hole in the pin.    Now slide the pin into the main body with spring and tighten the retaining cap.  See pictures.

Ring Terminals Are Included

5 Stars
510 connector from varitube
Ok...i needed some 510 connectors for my box mods that i was building...and i usually get mine from Fat Daddy Vapes...but they happened to be out! So...i decided to get 6 of them from Varitube instead...and i must say...AWESOME PRODUCT!!! This 510 connector looks great and professionally made...is MUCH better priced...and SO much easier to work with when it comes to the soldering process! I absolutely LOVE them...and from now on...Varitube will be getting ALL of my business! Keep up the great work (Varitube) and keep the prices great and the products even greater! VERY SATISFIED CUSTOMER, gators0222
Did you find this helpful?  81 of 88 Found Helpful
Reviewed by: (Verified Buyer)  from muscle shoals, al. on 10/5/2014
5/5
5 Stars
great fantastic top of the line
These blow fdv out of the water great design easy to work with very durable. Now restock them.....
Did you find this helpful?  29 of 33 Found Helpful
Reviewed by: (Verified Buyer)  from Oklahoma. on 10/12/2014
5/5
5 Stars
Nice
A sleek 510. Very low profile and great quality. Easy to install. A 3/16 drill bit will get you close to the right size hole. Just file it down a tad for a nice fit.
Did you find this helpful?  24 of 28 Found Helpful
Reviewed by: (Verified Buyer)  from Baltimore. on 7/2/2014
5/5
5 Stars
Perfect.
its the perfect 510 for the hanna box mod. its aprox 1mm thick so when a rba is in place its still recessed into the mod. i made a few separate orders for the 22mm. its just perfect.
Did you find this helpful?  17 of 20 Found Helpful
Reviewed by: (Verified Buyer)  from Pennsylvania. on 9/16/2014
5/5
5 Stars
OMG Fast shipping
I ordered Saturday got it on Monday. Wow i never gotten anything that fast. Thank you varitube.com. Makes internet shopping grand. Top notch 510 connector only thing i would say is that the hole that the wire goes through is small so only 14g wire but still good for what im using for.
Did you find this helpful?  14 of 21 Found Helpful
Reviewed by: (Verified Buyer)  from Clarksville TN. on 10/6/2014
5/5
5 Stars
Awesome!!
I use these connectors, THEY are the best! I like very much that they are a Low Profile connector. You don't have a giant Tall landing pad on top of your box mod. They are easy to use, and TOP Quality!!!
Did you find this helpful?  14 of 15 Found Helpful
Reviewed by: (Verified Buyer)  from Anderson, IN.. on 8/12/2014
5/5
5 Stars
awesome!!
these things are awesome the last ones i got seems to be updated with a bigger hole for the positive wire and a little stiffer spring which is great and i love the low profile of them and customer service is awesome too 5 stars for varitube
Did you find this helpful?  12 of 13 Found Helpful
Reviewed by: (Verified Buyer)  from nashville,NC. on 12/6/2014
5/5
5 Stars
Great 510 connector
Every mod should have this installed. Extremely well made and works perfect. I agree with the other reviewer that this should've come with a brass washer to solder the negative lead though. You guys should sell a m10 x .5 tap. They're a PITA to source at a reasonable price since it's not a commonly used thread pitch.
Did you find this helpful?  9 of 10 Found Helpful
Reviewed by: (Verified Buyer)  from NJ. on 11/14/2014
5/5
5 Stars
Great alternative to the FDV510
Great alternative to the FDV510
Did you find this helpful?  9 of 11 Found Helpful
Reviewed by: (Verified Buyer)  from Chicago, IL. on 8/7/2014
5/5
5 Stars
Deep Vapes
These 510s are one of the best on the market I went from the Fat Daddy Vapes 510 to these and I will never go back. The simplicity and ease of use make them the top on my list of you are looking for a good 510 for all your modding meeds then you have found it here. Thank you guys
Did you find this helpful?  7 of 10 Found Helpful
Reviewed by: (Verified Buyer)  from Cincinnati, oh . on 11/13/2014
5/5
5 Stars
A Fantastic Product, I get spoiled coming here :-)
These are GREAT. I've used all sorts of 510's. From Those that require the Hot glue gun to retain them, to Varitubes. NOTHING beats these. The design is perfect. I see a couple people saying they want a hole in the brass nut for Larger than a 14 ga. wire? Sounds NUTS. What, 12 ga. wire? I've passed 70 smps through 16 ga. wire, to this 510, with NO issues. No melted Insulators, NO problems. GOOD 16 ga. wire will fit, with a bit of drill work, IF i had ONE wish, It would be for a copper washer to be included to go under the nut, so as to be able to solder onto it, and provide good connectivity to the 510. Thanx for the GREAT Product Varitube.
Did you find this helpful?  7 of 10 Found Helpful
Reviewed by: (Verified Buyer)  from Lakota Indian Nation/Las Vegs. on 10/17/2014
5/5
5 Stars
Vaper
I installed a 22mm in a Sigelei 100W. No more jumping resistance. The neg tab made it a breeze. Thank's for helping me bring my mod back to life.I wish I would have done this the day I got it.
Did you find this helpful?  6 of 8 Found Helpful
Reviewed by: (Verified Buyer)  from Illinois. on 2/21/2015
5/5
3 Stars
Pretty Good
I wish these were a bit thicker to help dissipate a little more heat. Also the sleeve needs to be drilled to fit 14 or larger gauge wire and sometimes 16. Rather difficult to do without crimping the sleeve. Also an included negative washer would be a plus, as there is nothing to solder to besides the nut. I had to scour local hardware stores to find copper washers that would fit :( Overall pretty decent, but could be much better.
Did you find this helpful?  5 of 17 Found Helpful
Reviewed by: (Verified Buyer)  from Greenwood. on 10/4/2014
3/5
5 Stars
Great connector!
This was my first time doing any kind of a mod to a device. I installed this connector on hana style box due to the original connector completely falling out, as well as stripping. The install went smooth with the help of Varitube's staff advising me to try a 3/8 drill bit before using the tap. All in all I'm very happy with the connector and the staff! The threads on this thing feel so much better than the originals, and it's really nice to have a spring loaded pin! Thanks guys!
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from SC. on 1/17/2015
5/5
5 Stars
great connector, excellent service
all i can say is this connector works great and the service from varitube has been excellent through and through. one of the best one stop shops for dyi parts
Did you find this helpful?  4 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from new jersey. on 12/27/2014
5/5
5 Stars
Thanks
Thanks from a happy Canadian customer, this connector will look great on my mod.
Did you find this helpful?  3 of 5 Found Helpful
Reviewed by: (Verified Buyer)  from Canada. on 2/18/2015
5/5
5 Stars
Awesome Product, Awesome Service, Awesome Shipping!!
These 510's just *work*!! Easy disassemble, easy soldering. Why use anything else?? Fastest shipping around!! Three days to me. Amazing!!
Did you find this helpful?  2 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from Kentucky, USA. on 2/26/2015
5/5
5 Stars
Quality
Awesome product and the price is right on point. Seems like you made the positive wire hole wider and deeper.....👍👍👍👍👍. I put a #12 stranded in there and there is room for more! Not crazy about the longer negative rings but I can handle it! Keep up the good work.
Did you find this helpful?  2 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from Rhode island . on 1/23/2015
5/5
5 Stars
Great connector
Repaired a Hana Modz V4M with a Varitube 510. Perfect fit with a 22 mm, dead on resistance, no fluctuation of resistance. Nice spring 510 connector, slim stainless steel doesn't add any more height. Also used the parts from a Varitube 510 to salvage an Infinite Vaporflask 510 connector. The Varitube parts are a direct fit into the Infinite's 510 body.
Did you find this helpful?  1 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from United states. on 6/29/2015
5/5
5 Stars
very nice connectors
someone told me about these as an alternative to fdv 510s and i'm really glad i decided to give them a try. really nice product that is easy to install and shipping was fast. i'm glad i decided to try new connectors and probably won't go back to the old ones.
Did you find this helpful?  1 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Toronto, Canada. on 6/17/2015
5/5
5 Stars
Pretty Wonderful
Shipping was super fast. I bought this for my Sigelei 100w because only god knows what happened to the crap stock 510 connector. I bought the "smooth top" (without air channels) and I am super impressed with how sleek it looks. The connector is low profile on the inside, which was essential for replacing the very very low profile of the stock connector. This connector worked perfectly, but the job didn't go exactly as planned- there was a slight clearance issue, and I had to file down the end of the battery sled to slide it down 1 mm or so. NOT THIS CONNECTOR'S FAULT! Brought my mod back to life! I will be buying another one for my next DIY mod.
Did you find this helpful?  1 of 4 Found Helpful
Reviewed by: (Verified Buyer)  from Ohio. on 5/20/2015
5/5
5 Stars
14mm connector
I installed the 14mm on my mvp2, man what a difference. Quality here and installs are very simple.
Did you find this helpful?  1 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Dallas, Texas. on 1/28/2015
5/5
4 Stars
Sexy
Seems well built... Wish my 14 gauge silicone wire woulf fit... May try drilling it a touch
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Usa. on 8/22/2016
4/5
5 Stars
Best DIY 510 Connector By Far!
I've only used the 22mm versions so far and have not once been let down. There is always great contact with the atomizer. I won't use any other connector for any of my builds.
Did you find this helpful?  0 of 2 Found Helpful
Reviewed by: (Verified Buyer)  from Los Angeles. on 10/24/2015
5/5

Recently Viewed Items