VT 510 - Bottom Feeding 510 - Self-Adjusting or Manual

VT 510 - Bottom Feeding 510 - Self-Adjusting or Manual

Your Price: $5.99
Retail Price:$6.99
Your Savings:$1.00(14%)
In Stock
Part Number:VT_510-BF

Choose Options

Diameter Size
Black 22mm [+$0.50]
25mm [+$0.50]
Black 25mm [+$0.80]
Quantity Pricing
  • 1 - 5
  • $5.99
  • 6 - 20
  • $5.49
  • 21 - 49
  • $5.25
  • 50+
  • $4.99
We're proud to introduce the Drunk_J & GDeal Bottom Feeding 510 Connector!  The short story?  We were brought together by a mutual aquaintance and started working together in February 2016.   These guys being master Squonkers and well known in the modding community had developed a high quality connector they wanted to bring to the masses at a reasonable price ... they just wanted to share their work so others could acquire them easily and at a fair price.  Thats where we come in.  After 4 long months of work we finally are able to offer the best Bottom Feeding 510 on the market!

Here is a link to instructions with pictures on assembling - Instructions

Here's the specifics:

- Available in 3 sizes and 2 colors - 12mm, 22mm, & 25mm diameter landing pad, plus the 22mm in Black now!
- Stainless construction including the center pin
- High Temp Insulators
- Durable O-ring seals
- 2 configurations provided ... comes assembled as a self-adjusting spring loaded center pin (with an extremely strong spring) but also included is an additional insulator and O-Ring set to convert it to manual adjustment for those mods with a hard non-flexible connection to the 510.  Set it up to suit your needs!

Body and Insulator measure 14mm in length.  Stainless hollow center pin adds to that another 10-12mm but should be short coupled to your bottle anyhow

Ultra low profile Smooth Top Landing Pad, self-adjusting spring loaded center pin, brass backer nut for solid and secure installation.  

Made of Stainless, Brass, & High Temp insulating material this connector is the squonking 510 you have been looking for.  
  • The spring carries no electrical load!
  • Made of Stainless with High Temp Insulator - rated for 450F degrees continuous service
  • Body threading - M10x0.5 - 10mm diameter ... about 3/8"
  • Ring Terminal for ground connection included
5 Stars
25mm BF
High quality machining, strongest spring out there, zero leaking thru oring when adjusted correct to varitube spec which makes for a soild flush connection.
Did you find this helpful?  7 of 7 Found Helpful
Reviewed by: (Verified Buyer)  from Salem, OR. on 2/26/2017
5 Stars
After purchasing 4 of these to rework a few mods I loved the design and fit of the VT-510 but the threaded pin was making it hard to install and remove the bottles. Recently the upgraded pins were listed on the site. I purchased 4 of them and changed mine out. What a difference it made. Easy on and off with the bottles. No leaks. Just good vaping. Very happy now. Just wished the upgrade would have been included with the original purchase.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by: (Verified Buyer)  from USA. on 8/8/2017
5 Stars
A tad longer than some others. But provided your mod has the space, these are great. I use the fixed/non spring loaded pin. Just personal preference
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Australia. on 1/3/2019
5 Stars
Best I've found !
I was looking for a specific type of 510 Squonk connector . I put it in a Tuglyfe Squonk mod that had a defective 510 connector . Without going into details This 510 is PERFECT and cured my problem, BETTER than the original .THANKS VARITUBE !
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Malne. on 10/29/2018
5 Stars
Best quality and variety
All of varitubes 510’s are wonderful especially if you solder correctly. The options for sizes is great especially the 12mm 510 size because you can do a recessed 510 in a Hammond box as it’s much much much cheaper to buy a 12mm mill bit as opposed to a 22mm or 25mm mill bit. It gives me the ability to make my mods look flush and professional the only other place to get these is modmaker in the UK. Otherwise this is the best, and the only place to get a good variety on mad making supplies
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from . on 9/2/2018
5 Stars
Good for SVA YFTK Clone
It is of much higher quality compared to what originally came with the clone. I did not use the RDA base at the top, and only used the insulator and squonk tube/positive terminal with the original base. It fits nicely, except that the squonk tube is significantly longer than the original so I had to trim off the bottle tube by half. Otherwise, good quality! Haven't leaked in more than a week so far.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Boston. on 4/22/2018
4 Stars
Good quality
This is a good bf 510 out of the PKG especially since they got rid of the threading at the end(where your squonk bottle slides on) of the POS 510 post. Great job guys. Now if they would add a upgraded nut option so you had beefier nuts(no pun intended) on your bf pin for connections that would be great. Last but not least a silver plated parts upgrade would put this 510 Conn. over the top other vendors are making this available for their 510 Conn. and they can't keep them in stock because vapors love silver plated connections.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from . on 4/11/2018
5 Stars
I use these in manufacture of micro fog machine for cosplay utilizing ecigs connected to a small air pump They work perfectly for my application by allowing connection of battery source without direct soldering and also easy change to different ecig units Saved me much time and frustration
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Dublin,GA. on 3/14/2018
5 Stars
Solid & Reliable
Machined very well, and finished perfectly. Never had a bur, blemish, or failed part. Easy to assemble, & great throughput of current. The extras are a nice touch, & the new versions come with the upgraded pin. Will buy again. Although, I wish there was an option for a shorted pin. Would also like to see a large threaded positive nut available for purchase.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from USA. on 3/1/2018
5 Stars
I did in fact receive the order in a very timely fashion. Having never built a bottom feeder I was a little confused @ first but I figured it out quickly. The quality of the 510 is excellent. Well built and sturdy. Same for the squonk bottle minus the sturdy bit. Thanks for selling such a great product!
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from . on 1/15/2018
5 Stars
Very good
Great set up worked perfect for what i need. Squonk tube maybe a little long for most applications. Worked awesome for my dual 18650 squonk boxes.
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from Boise. on 1/13/2018
5 Stars
22mm bf 510
Vastly superior to the fat daddy 510s. Purchased 2, just in case I messed one up on the install. Was looking for a mod maker when i found these and was very pleased with my choice. Only complaint i have is how much thinner the 510 base was. So if you're looking at usi g this 510 as a replacement as i did, then find a spacer to go under it first
Did you find this helpful? 
Reviewed by: (Verified Buyer)  from . on 1/12/2018

Related Items



Silicone Squonk Bottle - 7ml
Average Rating(8)
$5.99  $5.49
In Stock

Recently Viewed Items